As I was not very satisfied with the Gimbals from my T9x I used the one from my Spektrum DX6i.

To do so i needed to modify the DX Gimbals a litle bit (remove the “Screw Towers”)

The next steps are soldering the Gimbal wires together.
In my case I had the following wire combination:

  • Yellow/Orange(DX6i) to White(T9x)
  • Red(DX6i) to Black(T9x)
  • Black(DX6i) to Red(T9x)
  • 20131230_165839